ZYNTRA+ · Infrastructure-Scale BESS

Containerised and Modular BESS for Infrastructure Scale

Utility substations, solar park co-location, microgrids, and mission-critical compute infrastructure.

ZYNTRA+ pairs LFP battery racks, power conversion cabinets and system controls into weatherproof enclosures and modular arrays — engineered for fast site deployment, grid-code compliance and EPC integration.

Two deployment cases

Where the range gets applied

Utility BESS

Containerised, grid-forming storage from a single 40 ft unit to a multi-container array. Native P/Q control, frequency regulation and black start.

Utility scale battery energy storage system

C&I BESS

Modular storage across rack, cabinet and container form factors, from 5 kWh to a full 20 ft unit — sized to the site rather than a fixed default.

Commercial and industrial battery storage

Product Catalogue

Nine models, from a 5.12 kWh rack module to a 4.5 MWh container.

Filter by form factor to narrow the range to what the site can physically take. Capacities are exact — the full parameter set for every model is on the specifications datasheet.

Warranty basis

Established per project, not under the residential policy.

Five years is the standard reference figure for ZYNTRA+ equipment. Actual duration, terms and service levels are set per project in the applicable commercial agreement — the ZYNTRA Residential & Commercial Limited Warranty Policy does not extend to infrastructure-scale installations.

Form factor

The complete ZYNTRA+ model range by capacity, form factor, enclosure rating, expandability and application.
Model	Capacity	Form factor	Enclosure	Expandability	Best for	Warranty
ZYN-BESS-20	1.5 – 2.2 MWh	20 ft container · battery racks + PCS cabinet	IP55 body / IP66 critical compartments	Container-to-container	C&I site / substation	Per project
ZYN-BESS-40	3.4 – 4.5 MWh	40 ft high-density container · battery racks + PCS cabinet	IP55 body / IP66 critical compartments	Container-to-container	Utility site / solar hybrid park	Per project
ZYN-BESS-ARRAY	Scales on a common bus	Multi-container array · common bus · LFP	IP55 body / IP66 critical compartments	Array-level scaling	Grid-scale & government infrastructure	Per project
ZYN-PACK-5	5.12 kWh	Standard rack-mount module	IP20 / IP21 — indoor only	Add packs to rack	Retail / telecom room	Per project
ZYN-PACK-15	15.36 kWh	3 stacked rack modules	IP21 indoor frame — indoor only	Add packs to rack	Small commercial building	Per project
ZYN-PACK-30	30.72 kWh	Standalone cabinet enclosure	IP54 sheltered cabinet	Pair with PCS cabinet	Distributed C&I site	Per project
ZYN-IND-10	10.24 kWh	Single modular block · 51.2 V × 200 Ah	IP56 — indoor or sheltered electrical room	Modular stack	Small factory / office block	Per project
ZYN-IND-50	51.20 kWh	5-module stacked array	IP56 — indoor or sheltered electrical room	Modular stack	Warehouse / commercial building	Per project
ZYN-IND-100	102.40 kWh	10-module cabinet matrix	IP56 — indoor or sheltered electrical room	Modular stack	Factory / government infrastructure	Per project

Enclosure ratings differ across the line

Rack and cabinet configurations are indoor or sheltered only.

Containerised models are IP55 on the body with IP66 on critical electrical compartments, and are outdoor-rated. Rack and cabinet configurations run IP20 to IP54 and use forced air cooling — they are not weatherproof, and not interchangeable with a container on an exposed site.

Open question

The ZYN-IND series line assignment is unconfirmed.

The specification portfolio files ZYN-IND-10, IND-50 and IND-100 under ZYNTRA Range A, while this site presents them within ZYNTRA+. It matters contractually rather than presentationally: as ZYNTRA they fall under the 5-year Residential & Commercial Limited Warranty Policy; as ZYNTRA+ they are excluded from it and warranty is set per project. Listed here as ZYNTRA+ pending confirmation.

Engineered for EPC Integration

Every ZYNTRA+ configuration is built around your bill of materials — inverter pairing, transformer specification and site spacing constraints define the build, not a fixed SKU. Pre-engineered sub-assemblies and pre-tested integration reduce on-site civil work and labour, and delivery sequencing can be synchronised against your project’s critical path.

Full Specifications Datasheet Talk to Our Engineering Team

Common to every ZYNTRA+ system

Get started

Sized Against Your Actual Load Profile

Share your load profile and site constraints. We size before quoting, and our engineering team scopes the configuration against your critical path.

Talk to Our Engineering Team