Apartments and homes
Where a single compact unit matters more than customisation.
ZYNTRA · ZyntraPOD
One Box. Battery, Inverter, and Nothing Left to Configure.
ZyntraPOD bundles a battery, inverter and smart energy control system into a single unit.
It integrates cleanly into your main line, and it just works. No separate components to source, size, or match.
Overview
Three decisions, removed.
Most backup setups mean three separate decisions — a battery, an inverter, and how they talk to each other. ZyntraPOD removes all three: one unit, factory-matched, ready to connect.
If you’d rather choose your own inverter and battery separately, see Residential ESS or Commercial ESS instead.
Applications
Quiet enough for a bedroom, and reliable enough for a server room.
Which is exactly where it’s already being used.
Small offices
One unit covering both battery and inverter needs.
Server rooms
Silent, indoor-safe operation with instant switchover for connected equipment.
Healthcare facilities
Zero-gap power transfer for equipment that can’t tolerate an interruption.
Key Features
Everything matched at the factory, not on site.
Instant power transfer
Zero-interruption switchover — no perceptible gap for anything plugged in, even mid-task.
Load prioritisation
The onboard smart BMS makes sure critical loads get power first during an extended outage, not whatever happens to draw first.
Grid and solar ready
Works with your existing grid supply and solar PV — no additional hardware to buy or fit.
Indoor-safe, zero emissions
Completely silent operation, safe for apartments, server rooms and healthcare facilities alike.
Installed, not plugged in
It integrates cleanly into your main line.
ZyntraPOD is wired into the distribution board by a qualified electrician as part of the installation — not connected to a wall socket. Your installation partner handles it end to end, from the first site visit to switch-on.
Technical Specifications
One unit, sized to the space it has to fit.
Minimum
5 kWh
As supplied
10.5 kWh
Maximum
11.7 kWh
One lit cell = 0.25 kWh of usable capacity, the same calibration used across the range. Talk to a Storage Expert about whether the capacity you need is a configuration choice at order time or an upgrade path.
Battery technology
LFP
Storage capacity
10.5 kWh (scalable from 5 to 11.7 kWh)
Output power
8.5 kVA — handles AC loads including air conditioners
Charge time
2–3 hrs
Switchover
Instant — no perceptible gap for connected devices
Dimensions
625 × 675 × 535 mm — fits a living area or a server room bay
Battery lifespan
10–12 years of daily use
Warranty
5 Yrs Onsite
ZyntraPOD’s lifespan sits below the standalone battery packs on Residential ESS (15–20 years) because it typically runs as an always-on inverter and battery system rather than backup-only — more continuous duty, a shorter (but still high-grade) rated life.
ZyntraPOD Full Datasheet
Complete specifications, enclosure dimensions, switchover behaviour and warranty terms.
FAQs
Frequently asked questions
Battery, inverter and the smart energy control system — one factory-matched unit. Nothing else to buy or size separately.
Not on ZyntraPOD itself — the battery and inverter are factory-matched into one sealed unit, which is what makes the single-box footprint possible. If you expect to expand capacity over time, Residential ESS's stackable packs are the better starting point.
Yes — completely silent operation was a design requirement, not an afterthought, specifically so it's safe to place in apartments, server rooms and healthcare facilities where noise matters.
It isn't a chemistry difference — the cells are the same LFP line used across the range. The trade-off is integration: bundling the inverter and battery into one shared enclosure and duty cycle is what removes the separate-component decision, whereas a standalone pack paired with its own independently housed inverter lets each part be serviced or replaced on its own schedule.
Related
Where to go next
Residential ESS
Seven standalone LFP packs from 1.2 to 7.7 kWh, to pair with an inverter you choose yourself.
Home battery backup systemCommercial ESS
The same engineering, sized for a workday’s power draw across offices, retail premises and clinics.
Office battery backup systemTechnology Hub
The three-layer architecture behind every ZYNTRA system — chemistry, protection and scheduling.
Battery management system technologyGet started
Discuss Your Requirement
Tell us where ZyntraPOD needs to go and what it needs to power — we’ll confirm it’s the right fit before you commit to anything.